RustifiedModding
Welcome to RM you should sign up if you haven't already

when you sign up look over the rules and if you follow them no problems will be had http://rustysforum.forumotion.com/t4-forum-rules


Chill, Chat and Mod!
 
HomePortalCalendarFAQSearchMemberlistUsergroupsRegisterLog in

Share | 
 

 [TUTORIAL] Easy way To Update Jtag/RGH To 16203 Dash

Go down 
AuthorMessage
JTH
Administrator
Administrator
avatar

Posts : 70
Join date : 2013-05-18
Age : 27
Location : USA, Florida

Rank
General:
10000/10000  (10000/10000)

PostSubject: [TUTORIAL] Easy way To Update Jtag/RGH To 16203 Dash   Sun May 19, 2013 2:49 am

(Updated) Dash 16203

What would you need

1 An xbox360 jtagged

2 A computer

3 And a usb flash drive that must "FAT32 formatted"



1 : First of all plug usb drive with computer and format as Fat32. then copy "flash 360" folder in root of usb drive (linked below)(download and unrar) now remove it.

Code:
http://www.mediafire.com/?eqdzcfbma9znxkn

2 : plug usb drive with xbox360 and turn it on.

3 : launch xexmenu or fsd and go to usb drive and then "flash 360" folder (you just copied to usb drive) and run Flash360.xex file.

4 : You,ll see three options :

Button A : write updflash.bin to nand

Button B : write update areas of rebooters

Button X : backup current nand to file

now becareful press X button from your 360 controller to backup nand and then it will ask for

save entire nand then press A button to continue.

that will save your nand backup named "flashdmp.bin" file in the root of "flash 360" folder.

5 : shutdown your xbox360 console and remove usb drive from xbox360.

6 : plug usb drive to your computer and just copy "flashdmp.bin" file from "flash 360" folder to your pc anywhere you want.

7 : now you have to need your cpu key. its very simple just press eject button on xbox360 console and wait for boot

8 : once cpu key shows up bottom of your screen, please read very carefully and copy it down on a papper and make a .txt (text document)

on your computer and type the cpu key then save it where you want.

9 : now download "xeBuild_GUI_2.09" file (linked below) unrar it and you,ll find "xeBuild_GUI_2.09" folder.

Spoiler:
 

10 : run "xeBuild GUI 2.0.exe" file from this folder

11 : expand "kernel version" and set 2.0.16203.0. (if this already set 2.0.16203.0 so leave it as it is)

and now click on source file "open" button and open "flashdmp.bin" file you just copied from usb drive to your computer.

12 : now click on "Get cpukey from keys.txt" button and open your saved cpu key.

13 : and click on output path "save" button and named it "updflash" then save it where you want.

14 : then hit "Generate hacked image" button and wait a while then it,ll pop up a message and click on "yes" button.

15 : now copy "updflash.bin"( you have just created and saved in wherever your computer ) to "flash 360" folder in usb drive.

16 : remove usb drive from computer and plug in xbox360. now turn on your xbox360.

17 : launch xexmenu or fsd and go to usb drive and then "flash 360" folder and run Flash360.xex file.

18 : You,ll see these three options again :

Button A : write updflash.bin to nand

Button B : write update areas of rebooters

Button X : backup current nand to file

now press A button from your 360 controller to write updflash.bin. then press A again to "raw flash with keeping current kv/config"

then press A Button then start button to continue.

19 : let it 100% complete then press any button then back buttton after countdown unplug your xbox360 power cable and av cables and any attached hdd for 2 minutes.

20 : after 2 minutes plug back all cables and turn on your xbox360 then configure your new 16203 dash do not connect live just enjoy your new dash.


How to recover Avatars

1 : plug your usb drive with computer. run "xeBuild GUI 2.0.exe" again.

2 : click on "Download" tab then click on "update drive list" button and find your usb drive in the letter. make sure "dashboard version[Avatars]" and "dashboard version [dashfiles]" both should be 2.0.16203.0.

3 : click on "prepare drive" button. that will creat an update for your xbox360 in usb drive. ok now remove usb drive from computer.

4 : plug usb drive in xbox360 and reboot the console. after reboot xbox360 will prompt for update. then update your xbox360 that will reboot automatically. that,s all you have done.

Dashlaunch 3.05

Code:
http://www.mediafire.com/?e4a1q1wv6zw0dz7




I Am A Site Admin PM Me For Any Help Needed

Back to top Go down
View user profile http://rustysforum.forumotion.com/forum
fallstreak
Junior


Posts : 1
Join date : 2013-09-20

PostSubject: Re: [TUTORIAL] Easy way To Update Jtag/RGH To 16203 Dash   Fri Sep 20, 2013 8:07 pm

Thank you very much for this great tutorial.
I updated successfully my Jtag and now I can enjoy GTA V.
Please keep the good tutorials coming specially for users like me who didn't Jtag their consoles on their own.
Back to top Go down
View user profile
lastiko
Junior


Posts : 1
Join date : 2013-11-10

PostSubject: Re: [TUTORIAL] Easy way To Update Jtag/RGH To 16203 Dash   Sun Nov 10, 2013 8:12 pm

i've done all the steps you mentioned above, but while i backup my NAND, it said reading 3 blocks errors. What should I do with that? is that okay?
i tried to ignore the message, and i tried to build updflash, but it said error can't write to destination directory...what should i do? should i re-backup my flash once again till it has no error or what?
thanks
Back to top Go down
View user profile
mubeen1992
Junior


Posts : 1
Join date : 2013-11-15

PostSubject: Re: [TUTORIAL] Easy way To Update Jtag/RGH To 16203 Dash   Fri Nov 15, 2013 7:00 pm

Thank You!
It worked great.
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: [TUTORIAL] Easy way To Update Jtag/RGH To 16203 Dash   

Back to top Go down
 
[TUTORIAL] Easy way To Update Jtag/RGH To 16203 Dash
Back to top 
Page 1 of 1
 Similar topics
-
» Update 10 o.O
» ECE (Easy Chess Engine) v.11.01
» iOS6 Update Issues
» FYI: New CB11 and Gui12 update
» Curl Tutorial!

Permissions in this forum:You cannot reply to topics in this forum
RustifiedModding :: Xbox 360 :: JTAG Support & Guides-
Jump to: